How do I set up my inhaler for first use?Updated a day ago

Setting up your Clinical Hydrogen Inhaler for the first time is simple. Here’s a step-by-step guide:

1. Prepare the unit

   • Place the inhaler on a flat, stable surface near a power outlet.

   • Make sure the red power switch at the back of the unit is turned OFF.

2. Fill the humidification bottles

   • Unscrew each bottle and fill it halfway with clean water.

   • Ensure the water covers the aeration stone inside the bottle.

3. Fill the main water tank

   • Unscrew the stainless-steel fill cap on the back.

   • Pour in distilled water only. Using tap or filtered water can cause scaling and damage the machine.

   • Check the side viewing window for the correct level.

   • Replace the cap tightly.

4. Connect the humidification bottles

   • Attach both bottles to the front of the inhaler using the down-hanging tubes.

5. Attach the nasal cannula(s)

   • Single user: Use the Y-connector to combine both outputs into one cannula.

   • Two users: Connect one cannula to each bottle.

6. Power on the device

   • Plug in the power cord.

   • Flip the red switch on the back.

   • Wait for the display to light up and beep.

The 3000 mL model follows a similar setup process to the smaller capacity units, but with a larger tank and output capacity.

💡 Pro Tips:

• When using two cannulas, the flow rate splits evenly (e.g., 600 mL/min = 300 mL/min per person).

• Keep tubing free of twists or kinks to avoid restricting airflow.

• The 3000 mL model provides a higher capacity flow, suitable for multiple users or longer continuous sessions.